Welcome to Shenzhen DERISER Photoelectric CO.,LTD.
Service hotline:400-888-2609
You are here:Home >> Product knowled... >> LED display >> LED display ins...

LED display installation method

LED screen installation in five ways

Time:2018-12-25 Views:216
Nowadays, LED screen applications are more and more extensive. According to different application fields and installation environments, LED screen installation methods are also different.Delenser, the manufacturer of LED display screen, has organized and introduced a set of common ways of LED screen installation to friends. The following is an introduction:

I. LED display fixed and installed

1. Wall-mounted installation

LED display is wall mounted
1) this installation method is usually used indoors or semi-outdoors
2) the display area of the screen is small, and generally there is no maintenance channel space. The whole screen can be taken down for maintenance, or it can be made into a folding one-piece frame
3) the screen area is a little larger, and generally adopts the pre-maintenance design (that is, the front maintenance design, usually adopts the column assembly method).

2. Column installation


LED electronic display column installation
There are a variety of column installation methods, generally used for outdoor advertising, as follows:
1) single column installation: suitable for small-screen applications
2) double column installation: suitable for large-screen applications
3) closed maintenance channel: suitable for simple box
4) open maintenance channel: suitable for standard box



3. Cantilever installation



LED screen cantilever installation
1) this method is mostly used indoors and semi-outdoors
2) generally used at the entrance of passageways and corridors, as well as stations, railway stations and subway entrances
3) it can be used for traffic induction on highways, railways and expressways
4) screen body design generally adopts integrated cabinet design, or lifting structure design



4. Suspension installation


LED display suspension installation
This installation method and cantilever installation method are much the same, the application is the same, the screen body adopts integrated cabinet design scheme, suitable for indoor, semi-outdoor screen body

5. Mosaic installation




Installation diagram of LED display panel Mosaic installation mode
1) the whole display screen body is embedded into the wall, and the display plane is on the same horizontal plane as the wall
2) simple box design
3) generally adopt pre-maintenance (front maintenance design)
4) this installation method is suitable for both indoor and outdoor use, but it is generally applied to the screen body with small dot distance and small display area
5) generally used in the doorway of the building, building hall and so on


6. Standing installation


LED display is installed in standing position
1) general use of integrated cabinet design, but also march-past combination design
2) suitable for indoor small dot distance specification screen body
3) generally, the display area is small
4) main typical application LED TV design



7. Roof installation


LED display mounted on the roof
1) wind resistance is the key to this installation
2) general installation with tilt Angle, or module USES Angle 8 ° design
3) mostly used for outdoor advertising display



Ii. Mobile portable LED screen installation

Installation diagram of LED screen mobile portable LED screen installation method
1) the screen body can be moved in real time according to actual needs
2) the screen body moves according to the display screen and the scene
3) truss guide rail design is adopted
4) generally used in the stage background screen, mostly used in TV stations, concerts and other sites




Iii. Hoisting method of LED rental display screen


Rental LED display installation diagram lifting method
1. The size of the screen is determined by the normal screen.
2. Hoisting screen should not be enlarged.Generally, 6M*10M is required.Exceptions to special box material and bar screen.
3. Hoist beam on top and bottom beam on bottom.The lifting beam is used for lifting the screen.
4. Between row and row boxes, use lifting mechanism to connect, and lock and tighten horizontal boxes.
5. Hoisting mechanism is divided into gear type, taper rod type and bolt type.
6. Gear type is expensive and beautiful.
7. Cone bar type is affordable and reliable.
8. Bolt type is the cheapest, reliable and troublesome to assemble. It is suitable for the case of no repeated disassembly



Iv. Installation of LED fence screen of the stadium



Installation method of LED fence screen of the course
1. Used for advertising display of a fence around a football field
2. The viewing Angle of the screen body can be adjusted according to the inclination of the support frame
3. Soft silicone mask design, and the use of soft dome design, to avoid sports collision injury



5. Arc-shaped LED display installation



LED arc display installation
Screen length x width (height) : LxW
Screen length W: refers to the height of the drawing surface.
Picture length L: the length of the picture.
The screen length can be preliminarily determined by the circumference of a circle or arc.Divide by the length of the module to determine the number of modules.
For the circular screen as far as possible according to 92 modules;Try to determine the number of modules in a row by integer multiples of 2, 3, 4, 5 and 6 (it is convenient to divide the box body and easy to produce).The drawing Angle of a module is generally 2 degrees, and only 4 degrees for a module, that is, 92 modules are generally required to form a perfect circular screen.Minimum of 60 modules.
After determining the number of one-line modules, the screen length can be obtained.
Screen length L= number of modules * length of modules
A is equal to L times W
For non-circular screens (curved screens), just divide them up as needed, like cutting a cake.
Mounting rack shall be customized according to the size of circular screen (arc screen).
In the real engineering installation, there are some other LED screen installation methods, but I will not introduce them here.In addition, during the installation process, engineers should strictly follow the installation operation process to ensure the qualified and safe installation of LED screen body, so as to truly exert the communication effect of LED screen and meet the requirements of advertisers.


分享
 45
24h service hotline: 400-888-2609
Phone (switchboard) : +86-(0)755-27990781 fax: +86-(0)755-27990757
Headquarter: dremcel industrial park, no. 116, buxin road, dab lane, guanlan street, long‘hua district, shenzhen city, guangdong province, China
Professional LED display, LED lighting, LED application products and overall solutions 
粤ICP备13073469号
德润赛尔集团总部-LED显示屏万店加盟申请
Follow us
Copyright 2018 Shenzhen De Run Sai Er Optoelectronics Co.,Ltd All Rights Reserved 
                                                                                    Stationmaster QQ: 2881651089

国内技术热线:

外贸技术热线:

媒体运营热线:

其它联系方式:

在线咨询