LED screen installation normal way of reading

Time:2019-01-04 Views:31

In order to allow those who need to make LED screens to quickly choose the installation method suitable for them, shenzhen derensel provides six ways to install LED screens in different environments.

LED screen installation mode selection

Firstly, according to the different requirements of each project, such as the choice of pixel, resolution, price, playback content, display life and front or rear maintenance, there will be different trade-offs.Of course, we should also consider the bearing capacity of the installation site, the brightness around the installation site, the viewing distance and Angle of the audience, the weather and climate conditions of the installation site, whether it is rainproof, whether it is ventilated and cooled, and other external conditions.

Also, to buy LED screen has very important on the one hand, is in designing the shape of appearance, already can do it according to tailor LED screen design and shape of buildings, such as the joint delta Asia science and technology in a lot of cinema and television use LED screen, LED display technique is used to perfection, to achieve the perfect visual effect.

In addition, it is necessary to pay attention to the installation site fire safety level, energy saving standards and other aspects of the project;Of course, when choosing, brand factors, LED screen quality, after-sales service and other aspects of the product are important factors to be considered.

Different requirements for each project, such as the choice of pixel, resolution, price, playback content, display life and front or rear maintenance, will have different trade-offs.Of course, we should also consider the bearing capacity of the installation site, the brightness around the installation site, the viewing distance and Angle of the audience, the weather and climate conditions of the installation site, whether it is rainproof, whether it is ventilated and cooled, and other external conditions.

In addition, it is also very important to buy LED screens in terms of appearance and shape design. Currently, it is possible to customize LED screens according to the design and shape of buildings.In addition, it is necessary to pay attention to the installation site fire safety level, energy saving standards and other aspects of the project;Of course, when choosing, brand factors, LED screen quality, after-sales service and other aspects of the product are important factors to be considered.

LED screen six installation methods

1. Column installation: it is mainly used for the installation of outdoor advertising LED screen, with a wide field of vision and relatively empty surrounding places, such as squares and parking lots.According to the size of the screen area can be divided into a single column and double column type installation.Column mounting is suitable for the installation of LED screen in open space, and the outdoor screen is installed on the column.Column type needs to make screen body steel structure besides, still need to make concrete or steel column, basically consider the geological condition of foundation.

2. Stacking: concrete structure is used on the ground to build a wall sufficient to support the whole LED screen. Steel structure is built on the wall to install the display screen.

3, Mosaic installation: indoor, suitable for small indoor screen.Since the installation space is small, in order not to take up space, according to the size of the screen area, dig out the same size area on the wall and embed the LED screen into the wall.The wall is required to be solid.Adopt the method of pre-maintenance, the cost is high.For outdoor installation, the embedded structure is suitable for the display screen projects already included in the building planning and design. The installation space of the display screen is reserved in advance during the construction of civil engineering projects. In the actual installation, only the steel structure of the display screen is needed to embed the display screen in the building wall, and enough maintenance space is left on the back.

4. Hanging installation: it is mostly suitable for large places such as station LED screen and airport LED screen to play the role of indicator sign.I want a smaller screen area.(10 square meters below) the requirement must have appropriate installation place, if upper part has crossbeam or the place that pass beam, and screen body wants to add rear cover commonly.

General mounting is applicable to the display screen of a single box body with the total weight of the screen body less than 50kg, which can be directly hung on the load-bearing wall without reserved maintenance space. The display box body adopts the front maintenance design, and the display screen can be lifted from the bottom for maintenance.

Rack mounting is suitable for general outdoor display screen. Considering the difficulty of maintenance of the display screen, steel structure is adopted to support the screen body and the wall. 800mm of maintenance space is reserved.

5. Wall-mounted installation: it is more suitable for indoor LED screen installation, with a small area (less than 10 square meters), and the requirement of wall is solid wall. Hollow brick or simple partition wall are not suitable for this installation method.

6, roof installation: mainly suitable for outdoor advertising LED screen, installation site is mainly the roof of the building, with the increase in the height of the building to consider the wind level should also increase.