What should I pay attention to before using full-color LED display
Time:2018-12-04
Views:120
What should I pay attention to before using LED screen?Derensel summarized the following points:
1. After the customer receives the goods, please carefully check whether the goods are damaged in the logistics process. If there is any obvious damage that causes the LED screen to fail to work normally, please contact us in time.
2. Screen opening: turn on the computer first, then the screen opening;When turning off the screen: turn off the screen first, then turn off the computer (turn off the computer first will cause high highlights in the screen body, easy to burn out the light pipe, serious consequences).
3. When the LED screen is switched on and off, the interval shall be more than 5 minutes.
4, in the case of live (that is, LED electronic screen is in the state of power), can not plug and unplug the communication line serial port head, otherwise it is easy to burn the communication chip, resulting in no communication, the consequences are very serious, please remember!
5. After the computer enters the LED control software, the screen can be turned on and powered on.
6. Avoid opening the LED screen when the LED screen is all red and out of control, because the impulse current of the system is *** large.
7. The screen cannot be opened when the outer frame of the computer is live.
8. When the environment temperature is too high or the cooling condition is not good, please pay attention not to open the screen for a long time.
9. When a row of LED screen body is very bright, please turn off the screen in time, and do not open the screen for a long time in this state
10. Power switch tripping of LED screen often occurs. Please check the screen body or replace the power switch in time.
11. Check the firmness of the joint regularly, and pay attention to timely adjustment in case of looseness.
12, LED screen communication lines and power lines should not be exposed outside, should avoid rodents and insects bite.
分享
.jpg)
